-
Okablowanie światłowodu
-
Fiber Optic Splitter Box
-
Rozdzielacz światłowodowy
-
Łącznik światłowodowy
-
Kabel MTP MPO
-
Pigtail światłowodowy
-
Przewód światłowodowy
-
Adapter światłowodowy
-
Tłumik światłowodu
-
Field Installable Connector
-
Kabel FTTH Drop Cable
-
Panel światłowodowy
-
Zamykanie splotu światłowodowego
-
Zestawy narzędzi światłowodowych
-
Jednostka sieci optycznej
-
Zestawy do montażu kabli
-
Antonioładne pudełko światłowodowe, dobra jakość, ładne opakowanie, miła obsługa, czekam na moje nowe zamówienia. Dzięki
-
ChataikaDziękuję za szybką dostawę za każdym razem, z tą samą jakością, zawsze wspierać mnie w cenie, dzięki za specjalne wsparcie dla nas za każdym razem. jak u firmę tak bardzo, do zobaczenia wkrótce w Chinach
-
Carla Louisadroga Sophie, bardzo czas, aby twój głos był taki słodki i zawsze zapewniał nam pełne rozwiązanie i natychmiastową odpowiedź oraz pomagał nam zdobywać coraz więcej klientów, dzięki
Fiber Optic Splice Closure 48 Core
Skontaktuj się ze mną, aby otrzymać bezpłatne próbki i kupony.
WhatsApp:0086 18588475571
czat: 0086 18588475571
Skype'a: sales10@aixton.com
W razie jakichkolwiek wątpliwości zapewniamy całodobową pomoc online.
xshape | Dome | max capacity | 48cores bunchy fibers |
---|---|---|---|
cable port | 4round ports | cable diameter | Φ8mm~Φ16 mm |
material | PC | splice tray qty | max. 4pcs |
closure dimension | 288*178 mm | weight | 2.0 kgs |
carton qty | 10 pcs | carton size | 80*43*35 mm |
High Light | fiber optic splice enclosure,fiber optic joint closure |
FTTH Mini Dome Fiber Optic Splice Closure, Mechanical Splice Closure 48 Core
Sell point:
- Mechanical sealing
- Cable port: 4round ports
- Size:288*178 mm
- splice tray: 4 x 12 Fibers
- Max capacity: 48cores
- Cable diameter: Φ8mm~Φ16 mm
- Matreial: PC
Application: aerial, underground, pipeline,hand hole, wall mount, pole mount.
Operation conditions:
- Temperatures: -40℃~+65℃
- Humidity: ≤95% (at 40℃)
- Air Pressure: 70kPa ~106kPa
Technical Specifications:
1.Seal performance: after the box is sealed, inflate to 100kPa inwards (inflation only apply to the
models with the air hole), and then soak it in the water of normal temperature, after 15 minutes
of steady observation, there is no bubble to overflow.
2. Insulation resistance: the insulation resistance between the metal work piece and the earth is
greater than 20kMΩ.
3. Pressurization: there is no breakdown or flash over under 15kVdc/1min between the metal work
piece and the earth.
4. The curvature radius of the fiber 40mm, without extra loss inside the splice tray.
5. It can bear the axial tensile strength no less than 1000N.
6. Lifetime: 25 years.
7. Other performances are all in accordance with the requirement of standard YD/T814-1998.
Dimension and capacity
Outside dimension (Height x Diameter) |
288mm×178mm |
Weight (excluding outside box) |
1800g—1910g |
Number of inlet/outlet ports |
4 pieces |
Diameter of fiber cable |
Φ8mm~Φ16 mm |
Capacity of FOSC |
Bunchy: 4-48 (cores) |
FOSC cover size |
Height x Diameter: 208mm x 132mm |
Fiber optic splice tray (FOST) capacity |
Bunchy:4,6,8,12,(cores) |
Fiber holding tray |
1pc |
Accessory list:
No. |
item |
Usage |
1 |
Heat shrinkable protective sleeve |
Protecting fiber splices |
2 |
Nylon tie |
Fixing fiber with protective coat |
3 |
Earthing wire |
Putting through between earthing devices |
4 |
Abrasive cloth |
Scratching fiber cables |
5 |
Labeling paper |
Labeling fibers |
6 |
Special wrench |
Installing and tightening nut of reinforced core and nut (plastic) of inlet/outlet tube |
7 |
Measuring paper |
To measure perimeter, of which its diameter is enlarged with seal tape |
8 |
Seal tape |
Enlarging diameter of fiber cable which fits in with gasket ring. |
9 |
Insulation tape |
Enlarging diameter of fiber cable for easy fixing |
10 |
Metal hoop |
For wall mounting and pole hugging |
11 |
Buffer tube
|
Hitched to fibers and fixed with FOST, managing buffer. |
12 |
Desiccant |
Put into FOSC before sealing for desiccating air |